The bathroom is the area of your home that requires the most elbow grease in order to properly remove soap scum, limescale, and other types of buildup lurking from different corners. It also takes a considerable amount of time to tick off all the tasks necessary to make it fresh and hygienic.
While hiring professional cleaners such as Portland’s NW Maids can ensure your bathroom is always orderly and sanitized, learning more about the efficient ways to tackle it helps you stay on top of everything. Keep reading to find out more about the best way to deal with it.
Table of Contents
What is the best way to clean a bathroom?
Whether you’re looking to reduce the time you spend disinfecting your bathroom, or you wish to recognize quality work by professional services, the following tips will help you do just that:
Clear the stuff out
The first thing you need to do is make sure nothing stands in your way once you start scrubbing and disinfecting. This is why you should take out the trash can, and rugs, used towels, and products from the counters, tub, and shower, so you can easily tackle all the surfaces.
Dust then vacuum or sweep
Start from the light fixtures and top corners of the room by removing cobwebs and accumulated dust with a long-handle duster. Switch to a damp cloth and wipe down all the hard surfaces as you work your way down, including shelves and countertops. Finally, vacuum or sweep the floor to remove any hair, loose dirt, and other debris lying around.
Spray the areas that need scrubbing
If you tackle areas such as the tub, shower, and sink on a regular basis, then you can apply an all-purpose cleaner. However, if there are any stubborn buildups, you’ll need an acid-based product. Either way, spray it onto all of these surfaces and let it sit while you take care of the other tasks.
Disinfect other surfaces
Grab a clean microfiber cloth and spray it with your disinfectant, then start wiping down the surfaces such as light switches, towel racks, shelves, doors, and door knobs. Make sure you go over the window sills and blinds as they tend to accumulate a lot of grime and dust.
Get your floor solution ready
Use a bucket to mix warm water and a floor disinfectant according to the label instructions. Set it aside so it can properly dilute as you continue to the next area on your list.
Back to scrubbing
The product you applied to your tub, shower, and sink will have loosened any dirt and cut through the buildup by now. You can use the abrasive side of a sponge to quickly scrub all the surfaces, rinse thoroughly with warm water, and let air dry.
Use a microfiber cloth with your glass product to wipe down mirrors, and a disinfectant to deal with the faucets. Dampen a clean cloth with water and go over the cabinet faces to remove dust and restore shine.
Disinfect the toilet
Apply your disinfectant onto the inside and outside of the bowl, as well as the seat. Wipe the outside and the seat with a clean cloth, and use a toilet brush to give a thorough scrub to the bowl’s inside. Finally, flush the toilet.
Mop the floor
Grab your mop and submerge it into your pre-made floor solution. Make sure you thoroughly squeeze the excess water so it’s only damp. Start working your way from the farthest corner of your bathroom all the way to the exit. Let it air dry and place back all the items you previously took out. Your bathroom’s as good as new.